FPGA Module
|
FPGA Module: This project provides
a breakout board for the Altera Cyclone EP1C3T100 FPGA. The board provides a great base for
experimenting with the NIOS I/II processor or testing out a core from
www.opencores.org.
The board
measures 3" x 1.2" and stacks with both the CPLD Module and the Memory
Expansion Module. |
CPLD Module
 |
CPLD Module: This project provides
a breakout board for the Altera Max EPM3064 CPLD. The board provides a great base for experimenting
with simple state machines and motor controllers. The
board measures 3" x 1.2" and stacks with both the FPGA Module and the Memory
Expansion Module. |
Memory Expansion Module
 |
Memory Expansion Module: This project allows the addition
of 512K SRAM and potentially 4GByte of SD Flash memory to either the Altera
Cyclone EP1C3T100 FPGA or Altera Max EPM3064 CPLD. The board also provides a
convenient interface for the High Speed Video Sensor.
The board measures 3" x 1.2" and stacks with both the FPGA and the CPLD
Module. A future board is in the works to provide 16MByte
of PSRAM or 64MByte of SDR/DDR SDRAM in addition to the SD Flash. |
Motor Control Module
 |
Motor Control Module: This project utilizes the venerable
(and low cost) L298P Dual H-Bridge Driver, allowing the control of speed and
direction of 2 DC Brush Motors or 1 Bipolar stepper motor. |
Ethernet Camera
 |
Ethernet Camera: This project attaches a small cell phone type *.jpeg
camera to a miniature Ethernet Server on a chip. It is very easy to serve
up low refresh rate webs (read 1 fps). I am or will be working on a
streaming video interface in the future. The next version will also have a
properly optimized PCB. |
Labview Camera / Gyro Interface
|
