Analog Projects

		Analog Projects

	RF Transceiver Module	RF Transceiver Module: This circuit is a 2.4GHZ transceiver that incorporates an 8051 microcontroller with 10 digital and 8 analog I/O. The circuit is best suited to interface with sensors (see: sensor page) or bridge RS232, I2C, SPI to a wireless node. Raw bandwidth is 1Mbit/s providing up to a 115kbaud bidirectional wireless interface. This module stacks with other modules and measures approx 1" x 2"
	Micro RF Transceiver Module	Micro RF Transceiver Module: This circuit s a 2.4GHZ transceiver that is similar in most respects to the above module except that it only has 1 analog channel and is intended to bridge wireless and serial protocols. This module measures approx 0.4" x 1.75"
	USB Interface for Micro RF Transceiver Module	USB Interface for Micro RF Transceiver: This circuit interfaces the Micro RF Transceiver Module to the USB port. The entire assembly is not much bigger than your typical USB Flash Drive.
	Phase Detector	Phase Detector Circuit: This circuit measures the phase difference between two signals at a frequency up to 150MHz. This is the main analog component for a LADAR distance measurement circuit.
	RF Sensor Module	Packaged RF Sensor Module: Dimension: 1.125" Diameter x 2" High Range: Approx 300' Sensors contained: Tilt, Angular Acceleration, Temperature. Operational Lifetime: 8hr Super capacitor, 2 week NiCd

This site was last updated 06/10/06